Dhyrion

Stream Control

Not recording.
🧭 Tug & AHT Quick Position (relative to Main Vessel)
Tug: m
AHT: m
*If checked, the position updates automatically and continuously while the Stream runs & the Main Vessel moves. If unchecked, the position only moves when you click "Update Parameters".
📍 Track History
🗺️ Map Survey Tools
Dist (m) : 0 m
Dist (NM): 0 NM
Bearing : 0°
*Click 2 points on the map to measure.
📐 Vessel Dimensions
📡 Sensor Offsets (X: +Stbd/-Port, Y: +Fwd/-Aft, Z: +Up/-Down from CRP/CoG)
GPS 1:
GPS 2:
SBES:
MBES:
USBL:
SBP:
SSS Tow:
MAG Tow:
*SSS & Magnetometer are towed: their position & depth follow the selected USBL beacon, not a fixed offset.
🖼️ Live Geometry Preview (Main Vessel)
Grid Lines: Every 5 Meters | (0,0) = Target CRP Origin
Column Hz = how often each sensor sends data (0 = sensor off, max 50). Orange/red = the estimated load exceeds the baud capacity (relevant for physical ports; virtual ports are not baud-limited).
Output type per sensor: COM = serial / virtual COM (Web Serial, straight from the browser). UDP = sends to host:port (EIVA listens on that port). TCP-C = TCP client, the simulator connects to the port in EIVA. TCP-S = TCP server, the simulator opens the port and EIVA connects to it (host 0.0.0.0).
UDP/TCP go through the Python server, so it must run on a PC that can reach EIVA. Default ports are different for every sensor.
SensorOutputBaudHz
⚠️ Fault Injection
Inject faults into the data being sent, to train operators or test how navigation software reacts. Sentences affected by a fault are marked orange in the log window. Set "Duration" so the fault switches off by itself.
▶️ NMEA Log Replay
Replay a real survey NMEA log file to one COM port. If the sentences carry timestamps (GGA/RMC/ZDA/GLL/...), the timing follows the timestamps. The target sensor's synthetic data is switched off during the replay; the map keeps using the simulation. Sentence-level faults (dropout, corrupt, loss, delay, GPS) also apply to the replay.
No file loaded.

Real-Time Vessel Map

🏷️ Sensor Legend

Live NMEA Output Stream Window (the log shows at most 2 sentence sets/second/sensor; data to COM stays complete at the set Hz)